| Product Description |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 50 ... 800 mm | |
| Adjustment range | 70 ... 800 mm | |
| Dead band | 0 ... 50 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 255 kHz | |
| Response delay | approx. 100 ms | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | indication of the switching state flashing: program function object detected |
|
| LED red | solid red: Error red, flashing: program function, object not detected |
|
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
| No-load supply current | ? 20 mA | |
| Input | ||
| Input type | 1 program input operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 k? program pulse: ? 1 s |
|
| Output | ||
| Output type | 1 switching output E5, PNP NO/NC, programmable | |
| Rated operating current | 200 mA , short-circuit/overload protected | |
| Default setting | Switch point A1: 800 mm , Switch point A2: 70 mm NC contact | |
| Voltage drop | ? 3 V | |
| Repeat accuracy | ? 1 % | |
| Switching frequency | ? 4 Hz | |
| Range hysteresis | 1 % of the set operating distance | |
| Temperature influence | ± 1.5 % of full-scale value | |
Here are 5 more great reasons to buy from us: